Our air nozzles, air knives and air blow guns are designed to reduce sound levels and improve the efficiency of blowing with compressed air.
Blowing with compressed air is common in industry when cleaning, drying, cooling, sorting or transporting objects. Silvent air nozzles are used in fixed installations and make efficient use of compressed air. All Silvent air nozzles feature the optimal combination of high blowing force, low energy consumption and low noise levels.
Air knives are most commonly used to blow away liquids, grime, airborne debris, etc. from surfaces or objects. Silvent air knives create a broad and effective flow of air that produces a pneumatic scraping effect without mechanical contact. All Silvent air knives feature the optimal combination of high blowing force, low energy consumption and low noise levels.
Manual blowing with compressed air is common in industry when cleaning, drying or cooling objects. Silvent air blow guns make efficient use of compressed air. All Silvent air blow guns feature the optimal combination of high blowing force, low energy consumption and low noise levels, at the same time as they are ergonomically designed for professional use.
The noise from compressed air valves is extremely hazardous, but equipping valve discharge ports with pneumatic mufflers often causes operational disturbances. Silvent pneumatic mufflers have integrated warning indicators. The technology basically entails that the pneumatic muffler itself sets the optimal combination of flow capacity and noise suppression thanks to the dynamic internal filter, which subsequently minimizes operational disturbances and eliminates clogging. Read more about Silvents Pneumatic Mufflers.
To optimize blowing, it is sometimes necessary to be able to make pressure or blowing angle adjustments, for example. In other cases protection against airborne debris may be needed. Silvent has different types of accessories for easily performing various blowing tasks, optimally and safely.
SILVENT 715 C: with aerodynamic slots to allow optimal utilization of compressed air while keeping the noise level to a minimum. Blowing force approximately 15 times stronger than SILVENT 701 (45.0 N (9.9 lbs)). For applications requiring more concentrated force on the center of the object to be cleaned, dried, cooled, transported, etc. The extra slot nozzle in the middle increases air velocity and thereby blowing force, while retaining the air cone pattern of a SILVENT 710. Specially made entirely of stainless steel. Part of SILVENT's 700 C series, together with 707 C and 730 C.
Material specification: EN 1.4305
See basic information about the technical data. Read more
Read Silvent Group General Instructions for Use before you install the product.