0
AIR NOZZLE
SILVENT 465 L
Item number: 04650169161, 04650269161
SILVENT 465 L: with a unique double nozzle system. Two different blowing patterns unite to achieve maximum results. The outer ring provides initial cleaning and prepares the surfaces for the inner system, which then completes the drying or cleaning process. Blowing force 76.0 N (16.77 lbs.).
Noise reduction 32 dB(A)
Energy savings 290 Nm3/h
Technical data
Replace open pipe Ø (mm)20
Blowing force (N)73.9
Air consumption (Nm³/h)450
Sound level (dB(A))94
Nozzle technologyLaval
Material (nozzle)Zn
ConnectionG 3/4"
Connection typeFemale
Weight (g)1429
Max temp (°C)70
Max op. pressure (MPa)1.0
Benefits when replacing an open pipe
Replace open pipe Ø (mm)20
Energy savings290 [Nm³/h]39%
Material specification: Zn ZP0410, EN 1.0718 Fzb, NBR 70, EN AB 43200, DIN 7500
Blowing properties at different pressures
Pressure (kPa)
2004006008001000
Blowing force (N)
29.959.688.2117.8150.1
Air consumption (Nm³/h)
218.5365.4533.7698.4856.6
Sound level (dB(A))
85.993.397.8100.3102.5
Technical data
Replace open pipe Ø (inch)3/4
Blowing force16.3 lbs
Air consumption (scfm)264.9
Sound level (dB(A))94
Nozzle technologyLaval
Material (nozzle)Zn
ConnectionNPT 3/4"
Connection typeFemale
Weight (lbs)3.150
Max temp. (°F)158
Max op. pressure (psi)145
Benefits when replacing an open pipe
Replace open pipe Ø (inch)3/4
Energy savings170.7 [scfm]39%
Material specification: Zn ZP0410, EN 1.0718 Fzb, NBR 70, EN AB 43200, DIN 7500
Blowing properties at different pressures
Pressure (psi)
406080100120
Blowing force (oz)
147.2222.8287.4362.3441.2
Air consumption (scfm)
168.0221.9291.9359.0425.2
Sound level (dB(A))
89.093.797.098.6100.5
Technical specifications
See basic information about the technical data. Read more
Efficient 360° cleaning and drying using SILVENT doughnut nozzles
Examples of cleaning or drying applications:
- cables or rods after rinsing
- pipes before labelling or packaging
- plastic or rubber profiles in extrusion lines
- tubes covered in oil or coating
Drying a pipe after washing using the doughnut nozzle SILVENT 463 L.
The design of 360° nozzles
SILVENT’s doughnut nozzles are designed to surround the material and deliver a uniform 360° air jet. The nozzles are arranged in inner, outer or double rings depending on application needs. Each nozzle is angled for maximum efficiency and minimal noise. Air is distributed evenly around the opening, including at the split in the ring, where specially angled nozzles ensure consistent coverage.
Instructions for use
Read Silvent Group General Instructions for Use before you install the product.
