1. A high noise level does not mean good blowing force
Nearly everyone understands that a higher noise level doesn’t necessarily indicate a more powerful engine. Yet many people believe that the higher the noise level, the stronger the blowing force. Many industries seem to be convinced that they have implemented efficient compressed air solutions simply because the noise level is high. Do you want to know the actual truth about noise and blowing force?
A high noise level is not the same as good blowing force and vice versa. In short, Silvent’s patented technology allows a reduction of the noise level without sacrificing blowing force. Extensive research and development has provided Silvent with the know-how required to design nozzles that create the least possible turbulence. This means that the noise level can be reduced by a full 50%.
2. Not many people know just how much compressed air actually costs
In your shower you use a nozzle that effectively sprays water over your entire body. We simply take this for granted. At the same time, the nozzle saves water and energy. Why don’t we apply the same logic at our places of work? In many industries people seem to think that compressed air is inexpensive or even free. In truth, it is just the opposite. Compressed air is among our most costly sources of energy.
One of several unique advantages of Silvent’s nozzles is that they can reduce air consumption by up to 50% in applications such as cleaning, drying and cooling. Silvent’s patented technology utilizes the surrounding air in an efficient manner and conserves large amounts of energy.
3. 70-80% of all hearing loss within the manufacturing industry is caused by compressed air
Noise is like sore muscles or a blister on your heel – it seems harmless and you get used to it. Nothing could be further from the truth. You don’t get used to it, it results in permanent injury. Tinnitus is increasingly common among industrial workers. Hearing loss can never be restored. Who is responsible for the working environment at your company?
Silvent’s patented nozzles and safety guns reduce air turbulence and thereby lower the noise level by at least 8-10 dB(A). This is experienced by the human ear as if the noise level has been cut in half. Using Silvent products minimizes the risk of contracting tinnitus and other serious forms of hearing loss.
4. Many people believe that any old piece of pipe is a satisfactory solution
Shopping in a convenience store is quick and easy. But in the long run, it is expensive. All too often a piece of pipe that happens to be lying nearby is installed when there is a need for compressed air. Of course this gets the job done, but 90% of all these “open pipe installations” are over-dimensioned and waste enormous amounts of energy. If you are seeking quick and easy compressed air solutions, the end results are likely to be costly in the long run.
Silvent offers the world’s widest range of compressed air nozzles. A fact that applies to all of Silvent’s nozzles is that energy consumption is reduced considerably when the blowing force and blowing pattern can easily be adapted to the job at hand. Installing an air nozzle is always a more efficient and economical solution.
5. The use of compressed air doesn’t need to mean a bad working environment
How would we react if every vehicle in our vicinity was not equipped with a muffler? Could we stand to be in the midst of city traffic during rush hour? Industry’s enormous need for compressed air is certainly unquestionable today. But why accept a noisy working environment that can lead to stress, headaches and nausea? Do you wish to contribute to a better environment at your place of work?
Silvent’s patented compressed air nozzles cut the noise level in half. This reduction means a considerable improvement of the working environment. Beyond any doubt there is a clear correlation between a good working environment and good personnel performance.
6. Air guns are often not adapted to the job they must perform
Do you use a crescent wrench to drive a nail? Of course not! But most people use the same air gun for every type of blowing operation. Blowing away heavy metal turnings requires much more force than general-purpose cleaning. This is obvious to you, isn’t it?
Silvent has the largest assortment of safety air guns in the world. There is always a gun to suit your particular needs. The right equipment gets the job done quickly, easily and efficiently.
7. 9 out of 10 air guns in use today are dangerous
You know that you are risking your life when you step into a busy street without checking to see if a car is coming. But did you know that your life is at stake when you use an unsafe air gun? Fatal accidents have occurred when air has been forced into the bloodstream. Do you have air guns at your company that can lead to life-threatening accidents?
The nozzle of a Silvent safety gun cannot be blocked by a hand. The maximum amount of pressure a Silvent gun can build up against human skin is so low that the risk of air bubbles entering the bloodstream and causing serious injury is negligible. Silvent’s safety guns fully comply with the strictest requirements of national authorities throughout the world.
8. Few realize the risk associated with the use of compressed air
Would you be able to perform your work without being able to see? Unfortunately the use of compressed air and eye injury are often related. Dust, particles and chips bounce back at the operator. Our eyes are sensitive organs that can be seriously damaged by even very small particles. Are you among those who forget to protect your eyes?
Silvent’s safety air guns can be fitted with a safety shield that effectively prevents particles from bouncing back at the operator’s eyes. Air shields are yet another example of our safety solutions. Both products are alternatives to safety goggles and comply with OSHA safety guidelines.
9. Cheap solutions turn out to be costly solutions
Good advice is often free. You have surely been advised at some time in the past to avoid cheap purchases without regard to quality, as they are seldom profitable in the long term. Blowing with an open pipe or a simple form of air gun are cheap solutions that become expensive in the long run due to the high operating cost. Take the following advice and you will have a solution that saves you energy.
Silvent technology utilizes your compressed air more efficiently and provides energy savings of 30-50% in comparison with open pipe blowing. The right equipment in combination with know- how decreases your operating costs. Invest in Silvent’s safety air guns and air nozzles and you will be doing yourself a favor, or as one of our customers put it, “Silvent’s products are an investment that allows you to save money”.
10. Many blowing operations are not efficient
Designing blowing applications is like walking a tight-rope. It is easy to understand the principles involved but few have a command of the technique required. Still, it is common
in industry today that companies build their own blowing applications in the belief that they have found optimal solutions. Do you think it is possible to design a solution that would make your blowing operations more efficient?
Silvent has many years of experience with compressed air. There are thousands of companies throughout the world that now regularly collaborate with Silvent’s application engineers. Silvent’s know-how gives them all the help they need for more efficient compressed air applications that provide better results and higher quality.