Contact us:
+46 33-23 79 00
Our sales staff can help you with your order and technical support. Open times are 7 am – 4 pm.

Silvent 910

SILVENT 910: back-blow nozzle used for blowing clean inside pipes or channels. Cleaning out pipe during and after tooling has always been a problem. Blowing clean using conventional methods is impossible as chips are blown further into the pipe rather than out. SILVENT 910 can handle blow-out of pipe with diameters from 25 mm (1") up to 100 mm (4"). The nozzles are based upon and manufactured in accordance with Silvent's patents, which means that both noise level and air consumption are kept to a minimum. Fully complies with EU Machine Directive noise limitations and OSHA safety regulations.
Noise reduction 73%
Air/cost savings 59%

Specifications

SI units US units  
Blowing force5.5 N1.2 lbs
Air consumption38 Nm³/h22.4 scfm
Sound level86 dB(A)
Blowing patternMisc.
ConnectionG 1/4" 1/4"-18 NPT
Connection typeFemale
DimensionsØ18x17.5 mmØ0.71x0.69 inch
MaterialStainless steel
Weight0.014 kg0.031 lbs
Max temp400 °C752 °F
Max operating pressure1.0 MPa143.0 psi

Benefits

Replace open pipe7 mm9/32 inch
Noise reduction [dB(A)]19 dB(A)73 %
Air/cost savings [Nm³/h]54 Nm³/h59 %
Meet the EU Machine directivesYes

Blowing properties at different pressures

SI units (kPa)2004006008001000
Blowing force (N)2.24.36.78.811.0
Air consumption (Nm³/h)15.630.044.859.973.3
Sound level (dB(A))76.583.487.090.192.6
US units (psi)406080100120
Blowing force (oz)10.716.121.426.732.3
Air consumption (scfm)12.318.524.430.436.7
Sound level (dB(A))79.483.886.688.890.4