Contact us:
+46 33-23 79 00
Our sales staff can help you with your order and technical support. Open times are 7 am – 4 pm.

Silvent 915

SILVENT 915: dispersion nozzle that generates a broad and circular air cone pattern. Designed for applications where air must be spread over a greater area at a short blowing distance. Works best when the blowing distance does not exceed 150 mm (6"). When blowing inside pipe and ducts the inside diameter should be between Ø 25 - 100 mm (1" - 4"). The standard exhaust angle is 45°. However, the design of the nozzle permits the angle of the exhaust holes to be modified. Upon request, angles of 90° or 135° are available. Low noise level and air consumption. Fully complies with EU Machine Directive noise limitations and OSHA safety regulations.
Noise reduction 67%
Air/cost savings 43%


SI units US units  
Blowing force5.5 N1.2 lbs
Air consumption38 Nm³/h22.4 scfm
Sound level86 dB(A)
Blowing patternMisc.
ConnectionG 1/4" 1/4"-18 NPT
Connection typeFemale
DimensionsØ20x27 mmØ0.79x1.06 inch
MaterialStainless steel
Weight0.020 kg0.044 lbs
Max temp400 °C752 °F
Max operating pressure1.0 MPa143.0 psi


Replace open pipe6 mm1/4 inch
Noise reduction [dB(A)]16 dB(A)67 %
Air/cost savings [Nm³/h]29 Nm³/h43 %
Meet the EU Machine directivesYes

Blowing properties at different pressures

SI units (kPa)2004006008001000
Blowing force (N)
Air consumption (Nm³/h)20.533.544.556.267.9
Sound level (dB(A))79.484.688.391.192.6
US units (psi)406080100120
Blowing force (oz)10.115.821.527.232.9
Air consumption (scfm)
Sound level (dB(A))82.085.487.889.791.2